The wireless multifunctional power relay is a component of the JABLOTRON 100+ system. Enrolled to the control panel, the relay copies selected PG outputs.
The relay can also be installed as an autonomous device responding to the activation of unidirectional wireless detectors of the JA-15x series. In this case, the relay triggers according to the mode selected for the particular detector (5 selectable modes: extended copy, impulse, change status, switch off and block). It provides a switching relay with galvanic safety separation for switching 230V/16A power loads. In the system it occupies one position.
Rated supply voltage | 100-230 V, 50-60 Hz |
---|---|
Internal power consumption at 230V AC (min / max) | 0.2 W / 0.7 W |
Operating frequency | 868.1 MHz, Jablotron protocol |
Antenna | internal |
Contact load capacity – protection class II | Max. switched voltage 250 V AC Resistance load (cosφ=1) max. 16 A Inductive, capacitive load (cosφ=0.4) max. 8 A Halogen lighting max. 1000 W Minimum switched DC power 0.5 W |
Diameter of connected conductors | max. 2 x 1.5 mm2 ; max. 1 x 2.5 mm2 |
Ingress protection class | IP20 |
Dimensions | 49 x 49 x 26 mm |
Operating temperature range | -10 °C to + 40 °C, RH 75% non-condensing |
In conformity with | ETSI EN 300 220-1, EN 50130-4, EN 55022, EN 60950-1 |
Operating conditions | ERC REC 70-03 |