JA-110N-DIN Bus DIN power output module

The JA-110N-PG-DIN module is designed for a DIN rail. Provides a power relay output. It can be used, for example, to control lighting, fans, etc. The relay output is programmable by control panel.

Declaration of conformity - JA-110N-DIN (PDF 0 B)

JA-110N-DIN Bus DIN power output module

Rating relay (electrically isolated) - Class II:
Power	12 V bus (9 ... 15 V)
Current consumption during backup (relay open / closed)	5 mA / 45 mA
Current consumption for cable choice	45 mA
Maximum switching voltage	250 V AC / 24V DC
Resistive load (PF = 1)	max.16
Inductive, capacitive load (PF = 0.4) max	8A
Halogen lighting max	1000 W
DC	384 W
Minimum DC switching power	0.5W
Twisted wires	2 x 1.5 mm2 max 1 x 2.5 mm2
Dimensions	18 x 90 x 64 mm
Environment	general indoor
Operating temperature range	-10 to + 40 ° C
Housing	IP-20
Complies with	EN 50130-4, EN 55022, EN 60950-1 DIN rail EN60715

Related products

AC-160-DIN Wireless multifunctional relay for DIN-rail installation

The wireless multifunctional relay is a component of the JABLOTRON 100+ system, but it can be equally installed as a stand-alone device without a link to a control panel.

JA-112I Bus section/output PG activation indicator

The JA-112I indicator indicates section security or activation of a PG (1 - 128) output by lighting up a red LED. It is connected to the control and indicating equipment via a bus.

JA-150N Wireless power output module PG

The JA-150N is a wireless PG power output module (10 A/230 V AC). It copies the state of a selected PG output in the JA-100 system (PG1 to PG 32).

JA-151N Wireless signal output module PG

The JA-151N is wireless PG power output module (1 A/24 V DC). It copies the state of a selected PG output in the JABLOTRON 100+ system (PG 1 to PG 32).

JB-110N Bus PG power output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output power relay. It can be used, for example, to control lighting, fans, etc.

JB-111N Bus signal PG output module

The product is a system device for the JABLOTRON 100+ . It provides a switching contact for the output signal relay. For example, it can be used to control an electric door lock, blocking, indication, etc.

JB-118N Bus signal PG output module - 8 outputs

The product is a system device for the JABLOTRON 100+ . It provides eight galvanically isolated outputs in all. For example, it can be used to control optical indicating elements, radio communicators or power relays.

JA-120N Bus module for control of an electric lock

The JA-120N module is designed for the power supply and control of electric locks and release systems from the system bus. It is fitted with batteries that ensure the initial current impulse required to open el. locks.

Webdevelopment