JA-150EM-DIN Wireless module for the impulse output of an electric meter
The module for DIN-rail installation is designed to display electric meter readings, which is available for customers via the MyJablotron Web Self-Service.
JA-150EM-DIN Wireless module for the impulse output of an electric meter
The module contains a radio transmitter designed for the wireless transfer of information from the electric meter via the control panel to the MyJablotron portal. The impulse converter is directly supplied from the mains and it contains galvanically separated circuits for 4 kV. The converter is designed for connection to a standard impulse output of an SO electric meter. It can distinguish two rates (it can be connected to the rate control line of the load management system). It also has an independent input that can be used e.g. to monitor opening of the switchboard cover.
Specifications
| Power supply | 230V/50 Hz, device of protection class II. |
|---|---|
| Internal power consumption | approx. 0.1 W |
| Operating frequency | 868.1 MHz |
| Communication range | approx. 300 m (line of sight) |
| IN input: | low-voltage, galvanically separated from the mains, operating voltage 5 V max. external voltage surge 30V DC max. connection conductor length 3 m. |
| PU input: | low-voltage, galvanically separated from the mains operating voltage 5 V max. external voltage surge 30V DC max. connection conductor length 3 m. it is compatible with the impulse output of SO electric meters of class B in accordance with EN 62053-31 |
| TA input: | input for the connection of load management control conductor, max. 230 V AC |
| Dimensions: | 68 x 96 x 18 mm, 1 DIN module |
| Working environment | outdoor, protected, -20 to +60 °C |
| Ingress protection class | front panel IP40 to EN 60529 |
| The product complies with | ETSI EN 300220-1, EN 50130-4, EN 55022 and EN 60950-1 |
